back terug
Balk ruw

Angelim vermelho

Balk ruw FSC 100%

50x150mm

50x150mm

Vanaf 10 december

info
Express levering mogelijk

Vanaf 10 december

Express levering mogelijk
Specificaties
Gerelateerde producten
Downloads
0 Stuks - €0,00
prijzen zijn incl. btw

Lengte

Prijs

Prijs stuks

Voorraad

Stuks

incl. btw

200 cm

€14,45

€28,89

14 beschikbaar

- +

200 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €28,89

- +

14 beschikbaar

250 cm

€14,45

€36,12

74 beschikbaar

- +

250 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €36,12

- +

74 beschikbaar

300 cm

€14,45

€43,34

56 beschikbaar

- +

300 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €43,34

- +

56 beschikbaar

350 cm

€14,45

€50,57

84 beschikbaar

- +

350 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €50,57

- +

84 beschikbaar

400 cm

€14,45

€57,79

86 beschikbaar

-4 verwacht

- +

400 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €57,79

- +

86 beschikbaar

-4 verwacht

450 cm

€14,45

€65,01

116 beschikbaar

- +

450 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €65,01

- +

116 beschikbaar

500 cm

€14,45

€72,24

290 beschikbaar

- +

500 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €72,24

- +

290 beschikbaar

550 cm

€14,45

€79,46

206 beschikbaar

- +

550 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €79,46

- +

206 beschikbaar

600 cm

€14,45

€86,68

23 beschikbaar

- +

600 cm

Kopmaat 50x150mm

Prijs per m¹ €14,45

Prijs per stuk €86,68

- +

23 beschikbaar

Totaal voor Angelim vermelho Balk ruw 50x150mm

Totaal incl. btw

€0,00

ttttt

Angelim vermelho Balk ruw 50x150mm

Downloads

Important properties of Angelim Vermelho rough sawn beams

  • Rough sawn wood is wood that has been sawn from the trunk. It is therefore also known as sawn wood. Rough / sawn boards can have a size difference in thickness and width. It is best to use planed wood if the application requires a fixed size.
  • Sawn (raw) wood comes directly from our sawmill. This may cause painted markings on the wood.
  • We supply timber at trade length. This means: not sawn square and not shortened to length, often with some excess length.
  • Dry cracks can be seen on the headsides. Always calculate at least 10 cm extra saw loss in length.
  • Correct installation is very important. Good ventilation, sufficient framing and correct fastening are required. Before you start, read our mounting tips and -regulations carefully!


Certification/h3>

This product is FSC 100% certified. The origin of FSC wood meets global standards for sustainable forest management. The forest will remain. Trees only disappear if they can be missed.


AD Humidity

This wood has been freshly sawn and is stored in our semi-open storage. The longer the wood is in storage, the more it will dry. When AD (Air Dried) wood dries too quickly, for example when used indoors or when it is in full sun, it will shrink and dryness cracks and/or bends can occur. We advise not to process AD in-house.


FAS Grade

This product is sorted according to the FAS (First and Second) grade. This is the most common and also the highest grade of (tropical) hardwood. With this grading, at least 83.3% of the wood is free from defects, small defects can occur over the remaining part. For complete defect-free processing, this product must be assembled saw-falling.


Angelim Vermelho

Angelim Vermelho is a type of wood from South America and it is orange brown to dark brown in color. The wood is very hard and very durable. Drying too quickly and smaller dimensions can cause cracks and deformation. Angelim Vermelho is mainly used for heavy structural loads and for direct ground contact. This type of wood impresses with its technical properties such as enormous hardness, wear resistance and very high durability.

Due to its very high durability, Angelim Vermelho can be used excellently for outdoor applications, e.g. in hydraulic engineering or bridge construction, vehicle construction , sheeting and lock gates. It is also used for noise barriers, stables and posts. Angelim Vermelho has a tendency to bleed out. This can cause stains on underlying work.

Angelim Vermelho is a structurally homogeneous wood species with an extremely high density. Dark lines, parallel to the annual rings, are characteristic of this type of wood. The fresh wood has an unpleasant odor. This smell disappears after some time.

Advantages

  • Very strong and wear-resistant wood
  • Suitable for extremely heavy loads
  • < li>Durability class 1
  • Beautiful homogeneous appearance
  • Very suitable for direct ground or water contact and heavy constructions

Processing

Despite the hardness of Angelim Vermelho, the wood is easy to work with if sharp, and preferably carbide, tools are used. For a nice finish, pre-drilling in combination with the use of a countersink or sovereign drill is recommended. Both prevent cracks in the wood and/or breakage of the screw heads.

Caution: Deep milling, longitudinal sawing or re-cutting can expose stresses. These stresses may have arisen during drying and processing. This is one of the reasons why we recommend adding 10% wood to your order. This way you can be sure that you have enough material to work with.

Levering

Ophalen vanaf 10 december. Levering tussen 14 december en 18 december. Vraag naar de mogelijkheden van express levering.

Specificaties

Houtsoort

Angelim vermelho

Certificaat

FSC 100%

Profielen

RGH2 - Balk ruw

Dikte

50mm

Breedte

150mm

Kwaliteit

FAS

Vochtigheid

AD

Categoriën

Barcodes

  • 200cm 6097835537331

  • 250cm 4485020222759

  • 300cm 6545136572723

  • 350cm 5535489009701

  • 400cm 6865105612183

  • 450cm 3363213087075

  • 500cm 2336599612637

  • 550cm 4578883633890

  • 600cm 3022811435755

What are rough sawn beams?

Sawn Angelim Vermelho is also sometimes called fine sawn Angelim Vermelho or rough sawn Angelim Vermelho. It concerns machine-sawn wood without any post-processing. Sawn wood still has wood fibers on the surface and a robust appearance. Sawn Angelim Vermelho may contain imperfections on the surface, as well as slight variations in width or thickness. Sawn wood is not completely dimensionally stable and may not be completely square.