back terug
Enkel blokprofiel

Siberisch lariks

Enkel blokprofiel



Gerelateerde producten
prijzen zijn incl. btw



Prijs stuks



incl. btw

Sorry, dit product is niet online beschikbaar.



Siberisch lariks Enkel blokprofiel 21x125mm

Important properties of Siberian lorx single-block profile

  • Together with triple-, double50/50 and double70/30 blockprofile, this forms the Barcode Profile. These block profiles can be combined or not. The grooves of this popular profile are slightly chamfered so that these planks can be mounted both horizontally and vertically. This profile is suitable for facades and walls to be processed both horizontally and vertically. If mounted vertically: Take into account left or right mounting so that the windward side does not force the rainwater into the groove.
  • Working width: 125 mm
  • The boards are sorted on one visible side, the rear may contain some scrapes, tire marks and/or roller marks.
  • The production reserves the right to deviate a maximum of 3-4% from the head size, in order to be able to produce a beautiful, straight and dimensionally stable product. planing. In addition, humidity can affect the head size (dry and warm weather causes shrinkage).
  • We supply wood at trade length. This means: not sawn square and not shortened to length, often with some excess length.
  • Dry cracks can be seen on the short sides. Always calculate at least 10 cm extra sawing loss in length.
  • Correct installation is very important. Good ventilation, sufficient framing and correct fastening are required. Before you start, read our mounting tips and instructions carefully!


EUTR: this product complies with the European Timber Regulation – 995/2010. This European regulation prohibits the marketing of illegally harvested wood. The party that first places the product on the European market has a duty of care to demonstrate that the product has not been illegally harvested or traded.

KD 18-20% Humidity

This product is machine dried back (kiln dried) to a moisture content that is in balance with the typical outdoor usage. Upon delivery, the product has a more or less elaborated shape and will mainly shrink or expand (provided assembling instructions are properly applied) depending on the weather conditions.

S/F Grade

This product is S/F sorted. This means a saw-falling grade in which the lowest class (extra) is sorted out. This grade is the most common for European and Russian coniferous wood.

Siberian Larch

Siberian Larch is a type of wood that comes from Russia. It is a popular and widely used wood species in Europe. It is straight and easy to process. Siberian Larch can be used in various outdoor projects and is affordable compared to tropical hardwood.

Compared to the European variant, Siberian Larch has smaller knots and a finer structure. This makes Siberian Larch the highest quality Larch wood species. Because these trees grow in a colder climate, the wood has a higher density and durability than European Larch. Façade cladding and wall cladding are popular applications, but the wood is also used as a decking or garden partition.

Siberian Larch originally has a warm golden-yellow hue, which will gray evenly over time. This is in contrast to European Larch, which is characterized by its salmon-pink colour. Especially the typical drawing of the wood provides the warm and charming appearance of these planks. The wood has small knots between 1 and 2 cm.


  • Affordable
  • Easy to work
  • Durability class 3
  • Beautiful small flames
  • Suitable as facade cladding, wall cladding and decking

Siberian Larch is a type of wood that is easy to use to work. The planks and beams must be pre-drilled before bolting. In addition, we always advise to use stainless steel screws and fasteners, this prevents stains on the wood. We do not recommend gluing, because shrinkage stresses occur with this wood.

Note: Deep milling, sawing lengthwise or sawing again can expose stresses. These stresses may have arisen during drying and processing. This is one of the reasons why we recommend adding 10% wood to your order. This way you can be sure that you have enough material to work with.



Siberisch lariks


P146A - Enkel blokprofiel








KD 18-20%



    What is barcode profile?

    Barcode is a profile that gives facade cladding a certain layering. It is a modern, varied interplay of lines that arouses curiosity. The barcode profile is a combination of the four profiles mentioned below and can be mounted both horizontally and vertically.

    • Triple block profile
    • Single block profile
    • < li>Double 50/50 block profile
    • Double 70/30 block profile